# Services confda Yazdiginiz Kismin Aynisini Yaziniz 
 
Module protocol/unreal 
 
# NetworkDomain domain [RECOMMENDED] 
# Protocols: bahamut, dalnet, dreamforge, monkey, ptlink, rfc1459, 
# trircd, ts8, undernet-p9 
# 
# Network Domaini 
 
#NetworkDomain "kelebek" 
 
# CSSetChannelTime [OPTIONAL] 
# Protocols: bahamut, monkey, trircd, unreal 
# 
# 
 
CSSetChannelTime 
 
# ServerNumeric <numeric> [RECOMMENDED] 
# Protocols: unreal 
# 
# Sadece Unreal için Açiniz 
 
ServerNumeric 7 
 
# SetServerTimes [<time>] [RECOMMENDED] 
# Protocols: unreal 
# 
# Sadece Unreal için Açiniz 
 
SetServerTimes 
#SetServerTimes 12h 
 
EndModule 
 
########################################################################### 
# 
# Eger Auth Kodu Aktif Ettiyseniz Burayi Ayarlayiniz 
# 
########################################################################### 
 
Module mail/main 
 
# FromAddress <email> [REQUIRED] 
# Giden Mail Adres 
 
FromAddress 
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.

 
# FromName <name> [OPTIONAL] 
# Görünecek Isim 
 
FromName "kelebek" 
 
EndModule 
 
################################ Sendmail-based low-level module 
 
Module mail/sendmail 
 
# SendmailPath <path> [REQUIRED] 
# Specifies the full path to the "sendmail" program to be used to 
# send mail. This program must accept a command-line option "-t" 
# to extract recipient addresses from a mail message given on 
# standard input (the standard "sendmail" program does this). 
# The program will be executed with the same environment as 
# Services itself is run with. 
 
SendmailPath /usr/lib/sendmail 
 
EndModule 
 
################################ SMTP-based low-level module 
 
Module mail/smtp 
# RelayHost <hostname> [REQUIRED] 
# Specifies the host to which all mail will be sent, e.g. your 
# local mail server. 
 
RelayHost mail.kelebek.gen.tr
 
# SMTPName <hostname> [REQUIRED] 
# Specifies the hostname Services will use in the HELO command to 
# the remote server. Normally, this should be set to the same as 
# the hostname of the machine Services runs on. 
 
SMTPName services.kelebek.gen.tr
 
# MaxSockets <count> [REQUIRED] 
# Specifies the maximum number of sockets to the mail server which 
# can be open at once. 
 
MaxSockets 100 
 
EndModule 
 
########################################################################### 
# 
# OperServ configuration 
# 
########################################################################### 
 
Module operserv/main 
 
OperServName "OperServ" "Operator Server" 
GlobalName "KELEBEK" "Global Noticer" 
OperServDB "oper.db" 
 
# ServicesRoot <nick> [REQUIRED] 
# Specifies the Services "super-user". The super-user, or "root" as 
# Services Root Nickini Yaziniz 
 
ServicesRoot toXic
KillClonesAutokill 30d
AllowRaw 
#WallOper 
#WallBadOS 
#WallOSChannel 
WallSU 
 
EndModule 
 
Module operserv/akill 
 
AutokillDB "akill.db" 
AutokillReason "irc.kelebek.gen.tr Sunucusuna girisiniz engellenmistir." 
#AutokillReason "Autokilled: %s" 
AutokillExpiry 30d 
AkillChanExpiry 7d 
#OperMaxExpiry 7d 
#EnableExclude 
ExcludeReason "IRC operator host" 
#ExcludeReason "Excluded from autokills: %s" 
ExcludeExpiry 30d 
#ImmediatelySendAutokill 
#WallOSAkill 
#WallAutokillExpire 
 
EndModule 
 
Module operserv/news 
NewsDB "news.db" 
 
EndModule 
 
Module operserv/sessions 
 
ExceptionDB "exception.db" 
# Kaç Giris Olacak 8 Normal 
DefSessionLimit 12 
 
 
MaxSessionLimit 100 
 
 
ExceptionExpiry 1d 
 
SessionLimitExceeded "The session limit for your host% has been exceeded." 
 
#SessionLimitDetailsLoc "Please visit [Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...] for more information about session limits." 
 
 
#SessionLimitAutokill 10s 5 30m "Exceeding session limit" 
 
#WallO***ception 
 
#WallExceptionExpire 
 
EndModule 
 
################################ S-line module settings 
 
Module operserv/sline 
 
SlineDB "sline.db" 
 
SGlineReason "Invalid real name" 
#SGlineReason "Invalid real name: %s" 
SQlineReason "Reserved nickname" 
SQlineReason "Kullandığınız rumuz kullanıma kapalı yada bir yöneticiye ait: %s" 
 
SZlineReason "You are banned from this network" 
#SZlineReason "Z-lined: %s" 
 
#ImmediatelySendSline 
SGlineExpiry 30d 
#SQlineExpiry 30d 
SZlineExpiry 30d 
#WallOSSline 
#WallSlineExpire 
SQlineIgnoreOpers 
SQlineKill 
 
EndModule 
 
########################################################################### 
# 
# NickServ configuration 
# 
########################################################################### 
 
Module nickserv/main 
 
NickServName "NickServ" "Nickname Server" 
NickServDB "nick.db" 
NSEnableRegister 
NSRegEmailMax 3 
NSRequireEmail 
NSRegDelay 5m 
#NSInitialRegDelay 30s 
NSDefKill 
#NSDefKillQuick 
NSDefSecure 
#NSDefPrivate 
#NSDefHideEmail 
#NSDefHideUsermask 
#NSDefHideQuit 
NSDefMemoSignon 
NSDefMemoReceive 
N***pire 30d 
N***pireWarning 3d 
NSSuspendExpire 25d 5d 
NSShowPassword 
NSEnforcerUser enforcer 
#NSEnforcerUser 
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.

NSForceNickChange 
NSReleaseTimeout 30s 
#NSAllowKillImmed 
NSListOpersOnly 
NSListMax 50 
NSSecureAdmins 
NSEnableDropEmail 
NSDropEmailExpire 10m 
NSHelpWarning 
 
EndModule 
 
################################ Access list module 
 
Module nickserv/access 
NSAccessMax 32 
NSFirstAccessEnable 
NSFirstAccessWild 
 
EndModule 
 
################################ Autojoin module 
 
Module nickserv/autojoin 
NSAutojoinMax 10 
 
EndModule 
 
################################ Link module 
 
Module nickserv/link 
 
NSLinkMax 2
 
EndModule 
 
################################ Authentication module 
 
Module nickserv/mail-auth 
 
 
NSNoAuthExpire 3m 
NSSendauthDelay 1h 
 
EndModule 
 
################################ SENDPASS module 
 
Module nickserv/sendpass 
 
NSSendpassDelay 1h 
 
EndModule 
 
########################################################################### 
# 
# ChanServ configuration 
# 
########################################################################### 
 
Module chanserv/main 
 
ChanServName "ChanServ" "Channel Server" 
 
ChanServDB "chan.db" 
CSEnableRegister 
#CSRegisteredOnly 
CSMaxReg 20 
CSDefKeepTopic 
CSDefSecureOps 
#CSDefPrivate 
CSDefTopicLock 
CSDefLeaveOps 
#CSDefSecure 
CSDefOpNotice 
#CSDefEnforce 
#CSDefHideEmail 
#CSDefHideTopic 
#CSDefHideMlock 
C***pire 14d 
CSSuspendExpire 12d 2d 
CSShowPassword 
CSAccessMax 1024 
CSAutokickMax 80 
CSAutokickReason "User has been banned from the channel" 
CSInhabit 15s 
CSRestrictDelay 15s 
CSListOpersOnly 
CSListMax 50 
CSForbidShortChannel 
 
EndModule 
 
################################ SENDPASS module 
 
Module chanserv/sendpass 
 
CSSendpassDelay 1h 
 
EndModule 
 
########################################################################### 
# 
# MemoServ configuration 
# 
########################################################################### 
 
Module memoserv/main 
 
MemoServName "MemoServ" "Memo Server" 
MSMaxMemos 20 
#M***pire 1500d 
#M***pireUnread 
MSSendDelay 3s 
MSNotifyAll 
 
EndModule 
 
################################ FORWARD module 
 
Module memoserv/forward 
 
MSAllowForward 
MSForwardDelay 10s 
 
EndModule 
 
################################ IGNORE module 
 
Module memoserv/ignore 
 
MSIgnoreMax 32 
 
EndModule 
 
########################################################################### 
# 
# StatServ configuration 
# 
########################################################################### 
 
Module statserv/main 
 
StatServName "StatServ" "Statistics Server" 
StatServDB "stats.db" 
SSOpersOnly 
 
EndModule 
 
 
# Burdan Asagidaki Ayarlar Biraz Karisik 
# O Yüzden Lütfen Dokunmayiniz. Basinda Açiklama Olmayan Satirlara 
# Dokunmaniz Tavsiye Edilmez. 
########################################################################### 
# 
# HTTP server modules 
# 
########################################################################### 
 
Module httpd/main 
 
# ListenTo <address>:<port> [REQUIRED] 
# Specifies the address and port number on which the HTTP server 
# will listen for incoming requests. <address> may be specified as 
# an IP address (first example below), a hostname (second example), 
# or the special string "*", which means "any IP address" (third 
# example). 
# 
# When a hostname is given, as in the second example below, 
# Services will look up the address(es) associated with the 
# hostname at startup time, and bind to every IP address found. 
# This can be useful, for example, with dynamic DNS, in which 
# the server's IP address changes periodically; however, the 
# hostname lookup can take time--especially if there is no DNS 
# server on the local network--and is susceptible to network or 
# DNS server outages, so IP addresses or "*" should be used 
# whenever possible. 
# 
# Note that many systems restrict low port numbers to the system 
# administrator; in particular, Unix-like systems allow only the 
# root user (UID 0) to use ports less than 1024. 
 
#ListenTo 127.0.0.1:12701 
#ListenTo services.example.net:8080 
#ListenTo *:80 
 
# ListenBacklog [REQUIRED] 
# Specifies the maximum number of connections that can be received 
# by the operating system without being accepted by Services (the 
# second parameter, `backlog', to the listen() system call). If 
# you start seeing refused or delayed connections on a busy server, 
# try increasing this value. 
# 
# If you don't understand the above, leave this setting alone. 
 
ListenBacklog 5 
 
# RequestBufferSize <bytes> [REQUIRED] 
# Specifies the size of the buffer allocated for each HTTP request. 
# Note that this buffer is allocated for every connection, and an 
# additional amount of memory will be allocated for header pointers 
# (in the pathological case this extra amount could reach 4/3 of 
# the value given for this directive). If a client sends a request 
# (including POST data) exceeding this value, an error will be 
# returned and the connection terminated. 
# 
# If you don't understand the above, leave this setting alone. 
 
RequestBufferSize 4096 
 
# MaxConnections <count> [RECOMMENDED] 
# Specifies the maximum number of simultaneous connections allowed. 
# If not given, no limit is placed on the number of connections; 
# however, the operating system may impose its own limits, which 
# are not under the control of Services. 
 
MaxConnections 10 
 
# MaxRequests <count> [RECOMMENDED] 
# Specifies the maximum number of requests that can be made over a 
# single connection before the server disconnects it. If not 
# given, no limit is placed on the number of requests per 
# connection; note that this may allow malicious users to interfere 
# with Services' normal operations by sending large numbers of 
# requests over a single connection. 
 
MaxRequests 20 
 
# IdleTimeout <time> [RECOMMENDED] 
# Specifies the length of time a connection can be idle (not 
# sending data) before it will be automatically closed. If not 
# given, connections will never be closed automatically. 
 
IdleTimeout 30s 
 
# LogConnections [OPTIONAL] 
# If given, a log message will be written for each connection to 
# the server. 
 
LogConnections 
 
EndModule 
 
################################ IP address authorization module 
 
Module httpd/auth-ip 
 
# AllowHost <path> <address> [OPTIONAL] 
# DenyHost <path> <address> [OPTIONAL] 
# Specifies which hosts will be allowed (or not allowed) to access 
# resources provided by the HTTP server. The <path> parameter is a 
# URL path (not including the "[Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...]"), and matches any 
# URL which begins with the same string; for example, "/dir" 
# matches both "/dir/file" and "/dirty". The <address> can be an 
# IP address, a hostname (as with ListenTo in the main server 
# module, all addresses associated with the hostname will be 
# allowed or denied), the string "*" (which means all addresses), 
# or the special format "<IP-address>/<mask>", where <mask> is an 
# integer from 1 to 31 giving the number of bits in the subnet 
# address, which indicates that the entire subnet of addressess 
# specified should be allowed or denied; for example, 
# "192.168.1.64/26" represents the range of addresses from 
# 192.168.1.64 to 192.168.1.127. 
# 
# Examples: 
# AllowHost /debug 127.0.0.1 # Allow all requests from localhost 
# # to the debug page 
# AllowHost / 192.168.0.0/24 # Allow any host in the 192.168.0.* 
# # network access to the entire server 
# DenyHost / shell.example.org # Deny connections from any address 
# # associated with shell.example.org 
# 
# Multiple AllowHost or DenyHost directives for the same path may 
# be used to specify multiple addresses to allow or deny. Each 
# condition will be checked in the order they are listed here, and 
# the first matching one will be used. For example, these lines: 
# AllowHost / 192.168.0.1 
# DenyHost / 192.168.0.0/24 
# deny access to all hosts in the 192.168.0.* network _except_ 
# 192.168.0.1. However, the reverse: 
# DenyHost / 192.168.0.0/24 
# AllowHost / 192.168.0.1 
# simply blocks all hosts in the 192.168.0.* network, since the 
# first rule matches 192.168.0.1 and the second is never checked. 
# 
# Access to the entire server can be allowed or denied by using the 
# path "/", which matches every URL (since all URLs begin with a 
# slash). It is good practice to include such a rule after all 
# others to explicitly indicate what should be done with requests 
# that do not match any other rule. (If a request does not match 
# any rules at all, it is implicitly allowed, but this behavior may 
# change in the future and should not be relied on.) For example: 
# AllowHost / * 
# or: 
# DenyHost / * 
# 
# WARNING: Hostnames are resolved only once at startup; any changes 
# in a host's IP address will not be seen by Services. 
# 
# Note: These directives are listed as "optional" only because the 
# module will still load even if no directives are listed; 
# however, unless AllowHost/DenyHost directives are given, 
# the module will not have any effect. 
 
AllowHost / * 
 
EndModule 
 
################################ Password authorization module 
 
Module httpd/auth-password 
 
# AuthName <name> [REQUIRED] 
# Specifies the name to be used by the user's browser when asking 
# for a password (as in "Enter username and password for <name>:"). 
 
AuthName "IRC Services" 
 
# Protect <path> <user>:<pass> [OPTIONAL] 
# Sets the URLs (paths) which will be protected by password 
# authorization, and the username and password for each path. The 
# username and password can be different for each path. The path 
# given will match any URL beginning with that string, as with the 
# auth-ip module. 
# 
# Examples: 
# Protect /debug "debug:debug" 
# Protect /~ "nickuser:nickpass" 
# 
# Note: This directive is listed as "optional" only because the 
# module will still load even if no directives are listed; 
# however, unless Protect directives are given, the module 
# will not have any effect. Use a path of "/" to apply 
# password protection to the entire server. 
 
EndModule 
 
################################ Database access module 
 
Module httpd/dbaccess 
 
# NOTICE: This module allows complete access to all Services data; 
# be certain to protect it from unauthorized access using 
# authorization modules or other means. 
 
# Prefix <path> [REQUIRED] 
# Sets the URL (path) at which database access will be accessible. 
# If this does not end with a slash, one will be appended 
# automatically. Access is provided using the following directory 
# tree: 
# 
# <path>/ Main menu 
# <path>/operserv/ OperServ data and menu 
# <path>/operserv/akill/ Autokill list 
# <path>/operserv/news/ News item list 
# <path>/operserv/sessions/ Session and exception lists 
# <path>/operserv/sline/ S-line lists 
# <path>/nickserv/ Nickname list and information 
# <path>/chanserv/ Channel list and information 
# <path>/statserv/ Network statistics 
# <path>/xml-export/ XML-format database download 
# 
# Categories for which the relevant module is not loaded will not 
# be accessible. 
# 
# WARNING: These functions, particularly the XML export function, 
# can cause Services to stop for a significant period of 
# time while they are processed! 
# 
# This is commented out by default; make sure you implement proper 
# access protection (see above) before uncommenting it. 
 
#Prefix "/dbaccess" 
 
EndModule 
 
################################ Debug page module 
 
Module httpd/debug 
 
# DebugURL <path> [REQUIRED] 
# Sets the URL (path) at which the debug page will be accessible. 
# This must begin with a slash. 
DebugURL "/debug" 
 
EndModule 
 
################################ Nick/channel redirect module 
 
Module httpd/redirect 
 
# NicknamePrefix <path> [OPTIONAL] 
# Sets the URL (path) at which nickname redirects will be 
# accessible; all characters after this prefix, up to the next 
# slash, will be taken as the nickname. This must begin with a 
# slash. The default value, "/~", emulates the traditional home 
# page URL of "[Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...]". If you use a 
# directory name instead, it must end with a slash, for example: 
# "/nickname/". See also ChannelPrefix, below. 
# 
# If not set, nickname redirects will not be done. 
 
NicknamePrefix "/~" 
 
# ChannelPrefix <path> [OPTIONAL] 
# Sets the URL (path) at which channel redirects will be 
# accessible; all characters after this prefix, up to the next 
# slash, will be taken as the channel name (without the leading 
# "#", which cannot be used in URLs). The path must begin with 
# a slash. The default value, "/channel/", gives URLs like 
# "[Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...]" for channel 
# "#channelname". 
# 
# If not set, channel redirects will not be done. 
# 
# Note: If a URL could be interpreted as both a nickname URL and a 
# channel URL, the nickname will take precedence, even if it 
# is not registered or does not have a URL associated with it. 
 
ChannelPrefix "/channel/" 
 
EndModule 
 
################################ Top page module 
 
Module httpd/top-page 
 
# Filename <path> [<content-type>] [OPTIONAL] 
# Sets the name of a file to be delivered as the server's top page. 
# If this does not begin with a slash, then it is taken as relative 
# to the Services data directory. The second parameter specifies 
# the MIME content type of the file; if not given, it defaults to 
# text/html. 
 
#Filename "Top Page.txt" text/plain 
#Filename /var/
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
Redirect <URL> [OPTIONAL] 
# Sets a URL to be provided as a redirect to a client accessing the 
# top page. This must be a full URL, beginning with "http://" (or 
# some other protocol specifier). If both Filename and Redirect 
# are given, Redirect takes precedence. 
 
#Redirect [Üye Olmadan Linkleri Göremezsiniz. Üye Olmak için TIKLAYIN...] 
 
EndModule 
 
########################################################################### 
# 
# Miscellaneous modules 
# 
########################################################################### 
 
################################ DevNull settings 
 
Module misc/devnull 
 
# DevNullName <nick> <string> [REQUIRED] 
# Specifies the nickname (first parameter) and "real" name (second 
# parameter) used by the DevNull pseudoclient. 
 
DevNullName "DevNull" "/dev/null -- message sink" 
 
EndModule 
 
################################ HelpServ settings 
 
Module misc/helpserv 
 
# HelpServName <nick> <string> [REQUIRED] 
# Specifies the nickname (first parameter) and "real" name (second 
# parameter) used by the HelpServ pseudoclient. 
 
HelpServName "HelpServ" "Help Server" 
 
# HelpDir <dirname> [REQUIRED] 
# Specifies the name of the subdirectory containing help files for 
# HelpServ. 
 
HelpDir helpfiles 
 
EndModule 
 
################################ XML export settings 
 
Module misc/xml-export 
 
# This module has no configurable settings. 
 
EndModule 
 
################################ XML import settings 
 
Module misc/xml-import 
 
# OnNicknameCollision <action> [OPTIONAL] 
# Specifies the action to be taken when a nickname in the data to 
# import is already registered. The string must be one of either 
# "skipgroup" (skip over the nickname group containing the nickname 
# in the imported data), "skipnick" (skip only the colliding 
# nickname), "overwrite" (drop the existing nickname), or "abort" 
# (do not import any data). Note that when "abort" is selected, 
# the entire XML input is still checked for errors, but Services 
# will abort before actually merging any data. 
# 
# When using "overwrite", if a nickname group has only one nickname 
# and that nickname is overwritten, the nickname group will be 
# dropped as well. As a consequence, any channels owned by such a 
# nickname will be dropped (or shifted to their successors) as 
# well. All nicknames and channels overwritten or droppde in this 
# manner will be displayed on standard error. 
# 
# If not specified, defaults to "skipgroup". 
 
#OnNicknameCollision skipgroup 
 
# OnChannelCollision <action> [OPTIONAL] 
# Specifies the action to be taken when a channel in the data to 
# import is already registered. The string must be one of either 
# "skip" (skip over the channel in the imported data), "overwrite" 
# (drop the existing channel), or "abort" (do not import any data). 
# Note that when "abort" is selected, the entire XML input is still 
# checked for errors, but Services will abort before actually 
# merging any data. If not specified, defaults to "skip". 
 
#OnChannelCollision skip 
 
# VerboseImport [OPTIONAL] 
# Causes a detailed list of imported nicknames, channels, and other 
# data to be printed to standard output. 
 
VerboseImport 
 
EndModule