# TekbirShell.Com
# mail & msn :
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
# tel : +90 543 779 21 40
# Günün 24 saati telefon ile destek alabilirsiniz.
# web :
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.Services confda Yazdiginiz Kismin Aynisini Yaziniz
Module protocol/unreal
# NetworkDomain domain [RECOMMENDED]
# Protocols: bahamut, dalnet, dreamforge, monkey, ptlink, rfc1459,
# trircd, ts8, undernet-p9
#
# Network Domaini
#NetworkDomain "mIRCDostum.Com"
# CSSetChannelTime [OPTIONAL]
# Protocols: bahamut, monkey, trircd, unreal
#
#
CSSetChannelTime
# ServerNumeric <numeric> [RECOMMENDED]
# Protocols: unreal
#
# Sadece Unreal için Açiniz
ServerNumeric 2
# SetServerTimes [<time>] [RECOMMENDED]
# Protocols: unreal
#
# Sadece Unreal için Açiniz
SetServerTimes
#SetServerTimes 12h
EndModule
###########################################################################
#
# Eger Auth Kodu Aktif Ettiyseniz Burayi Ayarlayiniz
#
###########################################################################
Module mail/main
# FromAddress <email> [REQUIRED]
# Giden Mail Adres
FromAddress
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
# FromName <name> [OPTIONAL]
# mIRCDostum
FromName "mIRCDostum.Com"
EndModule
################################ Sendmail-based low-level module
Module mail/sendmail
# SendmailPath <path> [REQUIRED]
# Specifies the full path to the "sendmail" program to be used to
# send mail. This program must accept a command-line option "-t"
# to extract recipient addresses from a mail message given on
# standard input (the standard "sendmail" program does this).
# The program will be executed with the same environment as
# Services itself is run with.
SendmailPath /usr/lib/sendmail
EndModule
################################ SMTP-based low-level module
Module mail/smtp
# RelayHost <hostname> [REQUIRED]
# Specifies the host to which all mail will be sent, e.g. your
# local mail server.
RelayHost mail.mIRCDostum.Com
# SMTPName <hostname> [REQUIRED]
# Specifies the hostname Services will use in the HELO command to
# the remote server. Normally, this should be set to the same as
# the hostname of the machine Services runs on.
SMTPName services.mIRCDostum.Com
# MaxSockets <count> [REQUIRED]
# Specifies the maximum number of sockets to the mail server which
# can be open at once.
MaxSockets 100
EndModule
###########################################################################
#
# OperServ configuration
#
###########################################################################
Module operserv/main
OperServName "OperServ" "Operator Server"
GlobalName "DUYURU" "Global Noticer"
OperServDB "oper.db"
# ServicesRoot NitX [REQUIRED]
# Specifies the Services "super-user". The super-user, or "root" as
# Services Root Nickini Yaziniz
ServicesRoot NitX
KillClonesAutokill 20d
AllowRaw
#WallOper
#WallBadOS
#WallOSChannel
WallSU
EndModule
Module operserv/akill
AutokillDB "akill.db"
AutokillReason "mIRCDostum.Com'a girisiniz engellenmistir."
#AutokillReason "Autokilled: %s"
AutokillExpiry 30d
AkillChanExpiry 7d
#OperMaxExpiry 7d
#EnableExclude
ExcludeReason "IRC operator host"
#ExcludeReason "Excluded from autokills: %s"
ExcludeExpiry 30d
#ImmediatelySendAutokill
#WallOSAkill
#WallAutokillExpire
EndModule
Module operserv/news
NewsDB "news.db"
EndModule
Module operserv/sessions
ExceptionDB "exception.db"
# Kaç Giris Olacak 8 Normal
DefSessionLimit 25
MaxSessionLimit 100
ExceptionExpiry 1d
SessionLimitExceeded "The session limit for your host% has been exceeded."
#SessionLimitDetailsLoc "Please visithttp://your.website.url for more information about session limits."
#SessionLimitAutokill 10s 5 30m "Exceeding session limit"
#WallO***ception
#WallExceptionExpire
EndModule
################################ S-line module settings
Module operserv/sline
SlineDB "sline.db"
SGlineReason "Invalid real name"
#SGlineReason "Invalid real name: %s"
SQlineReason "Reserved nickname"
SQlineReason "Kullandığınız rumuz kullanıma kapalı yada bir yöneticiye ait: %s"
SZlineReason "You are banned from this network"
#SZlineReason "Z-lined: %s"
#ImmediatelySendSline
SGlineExpiry 30d
#SQlineExpiry 30d
SZlineExpiry 30d
#WallOSSline
#WallSlineExpire
SQlineIgnoreOpers
SQlineKill
EndModule
###########################################################################
#
# NickServ configuration
#
###########################################################################
Module nickserv/main
NickServName "NickServ" "Nickname Server"
NickServDB "nick.db"
NSEnableRegister
NSRegEmailMax 5
NSRequireEmail
NSRegDelay 5m
NSInitialRegDelay 1m
NSDefKill
#NSDefKillQuick
NSDefSecure
#NSDefPrivate
#NSDefHideEmail
#NSDefHideUsermask
#NSDefHideQuit
NSDefMemoSignon
NSDefMemoReceive
N***pire 30d
N***pireWarning 3d
NSSuspendExpire 25d 5d
NSShowPassword
NSEnforcerUser enforcer
#NSEnforcerUser
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.
NSForceNickChange
NSReleaseTimeout 30s
#NSAllowKillImmed
NSListOpersOnly
NSListMax 50
NSSecureAdmins
NSEnableDropEmail
NSDropEmailExpire 10m
NSHelpWarning
EndModule
################################ Access list module
Module nickserv/access
NSAccessMax 32
NSFirstAccessEnable
NSFirstAccessWild
EndModule
################################ Autojoin module
Module nickserv/autojoin
NSAutojoinMax 10
EndModule
################################ Link module
Module nickserv/link
NSLinkMax 2
EndModule
################################ Authentication module
Module nickserv/mail-auth
NSNoAuthExpire 3m
NSSendauthDelay 1h
EndModule
################################ SENDPASS module
Module nickserv/sendpass
NSSendpassDelay 1h
EndModule
###########################################################################
#
# ChanServ configuration
#
###########################################################################
Module chanserv/main
ChanServName "ChanServ" "Channel Server"
ChanServDB "chan.db"
CSEnableRegister
#CSRegisteredOnly
CSMaxReg 10
CSDefKeepTopic
CSDefSecureOps
#CSDefPrivate
CSDefTopicLock
CSDefLeaveOps
#CSDefSecure
CSDefOpNotice
#CSDefEnforce
#CSDefHideEmail
#CSDefHideTopic
#CSDefHideMlock
C***pire 14d
CSSuspendExpire 12d 2d
CSShowPassword
CSAccessMax 1024
CSAutokickMax 80
CSAutokickReason "User has been banned from the channel"
CSInhabit 15s
CSRestrictDelay 15s
CSListOpersOnly
CSListMax 50
CSForbidShortChannel
EndModule
################################ SENDPASS module
Module chanserv/sendpass
CSSendpassDelay 1h
EndModule
###########################################################################
#
# MemoServ configuration
#
###########################################################################
Module memoserv/main
MemoServName "MemoServ" "Memo Server"
MSMaxMemos 20
#M***pire 1500d
#M***pireUnread
MSSendDelay 3s
MSNotifyAll
EndModule
################################ FORWARD module
Module memoserv/forward
MSAllowForward
MSForwardDelay 10s
EndModule
################################ IGNORE module
Module memoserv/ignore
MSIgnoreMax 32
EndModule
###########################################################################
#
# StatServ configuration
#
###########################################################################
Module statserv/main
StatServName "StatServ" "Statistics Server"
StatServDB "stats.db"
SSOpersOnly
EndModule
# Burdan Asagidaki Ayarlar Biraz Karisik
# O Yüzden Lütfen Dokunmayiniz. Basinda Açiklama Olmayan Satirlara
# Dokunmaniz Tavsiye Edilmez.
###########################################################################
#
# HTTP server modules
#
###########################################################################
Module httpd/main
# ListenTo <address>:<port> [REQUIRED]
# Specifies the address and port number on which the HTTP server
# will listen for incoming requests. <address> may be specified as
# an IP address (first example below), a hostname (second example),
# or the special string "*", which means "any IP address" (third
# example).
#
# When a hostname is given, as in the second example below,
# Services will look up the address(es) associated with the
# hostname at startup time, and bind to every IP address found.
# This can be useful, for example, with dynamic DNS, in which
# the server's IP address changes periodically; however, the
# hostname lookup can take time--especially if there is no DNS
# server on the local network--and is susceptible to network or
# DNS server outages, so IP addresses or "*" should be used
# whenever possible.
#
# Note that many systems restrict low port numbers to the system
# administrator; in particular, Unix-like systems allow only the
# root user (UID 0) to use ports less than 1024.
#ListenTo 127.0.0.1:12701
#ListenTo services.example.net:8080
#ListenTo *:80
# ListenBacklog [REQUIRED]
# Specifies the maximum number of connections that can be received
# by the operating system without being accepted by Services (the
# second parameter, `backlog', to the listen() system call). If
# you start seeing refused or delayed connections on a busy server,
# try increasing this value.
#
# If you don't understand the above, leave this setting alone.
ListenBacklog 5
# RequestBufferSize <bytes> [REQUIRED]
# Specifies the size of the buffer allocated for each HTTP request.
# Note that this buffer is allocated for every connection, and an
# additional amount of memory will be allocated for header pointers
# (in the pathological case this extra amount could reach 4/3 of
# the value given for this directive). If a client sends a request
# (including POST data) exceeding this value, an error will be
# returned and the connection terminated.
#
# If you don't understand the above, leave this setting alone.
RequestBufferSize 4096
# MaxConnections <count> [RECOMMENDED]
# Specifies the maximum number of simultaneous connections allowed.
# If not given, no limit is placed on the number of connections;
# however, the operating system may impose its own limits, which
# are not under the control of Services.
MaxConnections 10
# MaxRequests <count> [RECOMMENDED]
# Specifies the maximum number of requests that can be made over a
# single connection before the server disconnects it. If not
# given, no limit is placed on the number of requests per
# connection; note that this may allow malicious users to interfere
# with Services' normal operations by sending large numbers of
# requests over a single connection.
MaxRequests 20
# IdleTimeout <time> [RECOMMENDED]
# Specifies the length of time a connection can be idle (not
# sending data) before it will be automatically closed. If not
# given, connections will never be closed automatically.
IdleTimeout 30s
# LogConnections [OPTIONAL]
# If given, a log message will be written for each connection to
# the server.
LogConnections
EndModule
################################ IP address authorization module
Module httpd/auth-ip
# AllowHost <path> <address> [OPTIONAL]
# DenyHost <path> <address> [OPTIONAL]
# Specifies which hosts will be allowed (or not allowed) to access
# resources provided by the HTTP server. The <path> parameter is a
# URL path (not including the "http://host.name"), and matches any
# URL which begins with the same string; for example, "/dir"
# matches both "/dir/file" and "/dirty". The <address> can be an
# IP address, a hostname (as with ListenTo in the main server
# module, all addresses associated with the hostname will be
# allowed or denied), the string "*" (which means all addresses),
# or the special format "<IP-address>/<mask>", where <mask> is an
# integer from 1 to 31 giving the number of bits in the subnet
# address, which indicates that the entire subnet of addressess
# specified should be allowed or denied; for example,
# "192.168.1.64/26" represents the range of addresses from
# 192.168.1.64 to 192.168.1.127.
#
# Examples:
# AllowHost /debug 127.0.0.1 # Allow all requests from localhost
# # to the debug page
# AllowHost / 192.168.0.0/24 # Allow any host in the 192.168.0.*
# # network access to the entire server
# DenyHost / shell.example.org # Deny connections from any address
# # associated with shell.example.org
#
# Multiple AllowHost or DenyHost directives for the same path may
# be used to specify multiple addresses to allow or deny. Each
# condition will be checked in the order they are listed here, and
# the first matching one will be used. For example, these lines:
# AllowHost / 192.168.0.1
# DenyHost / 192.168.0.0/24
# deny access to all hosts in the 192.168.0.* network _except_
# 192.168.0.1. However, the reverse:
# DenyHost / 192.168.0.0/24
# AllowHost / 192.168.0.1
# simply blocks all hosts in the 192.168.0.* network, since the
# first rule matches 192.168.0.1 and the second is never checked.
#
# Access to the entire server can be allowed or denied by using the
# path "/", which matches every URL (since all URLs begin with a
# slash). It is good practice to include such a rule after all
# others to explicitly indicate what should be done with requests
# that do not match any other rule. (If a request does not match
# any rules at all, it is implicitly allowed, but this behavior may
# change in the future and should not be relied on.) For example:
# AllowHost / *
# or:
# DenyHost / *
#
# WARNING: Hostnames are resolved only once at startup; any changes
# in a host's IP address will not be seen by Services.
#
# Note: These directives are listed as "optional" only because the
# module will still load even if no directives are listed;
# however, unless AllowHost/DenyHost directives are given,
# the module will not have any effect.
AllowHost / *
EndModule
################################ Password authorization module
Module httpd/auth-password
# AuthName <name> [REQUIRED]
# Specifies the name to be used by the user's browser when asking
# for a password (as in "Enter username and password for <name>:").
AuthName "IRC Services"
# Protect <path> <user>:<pass> [OPTIONAL]
# Sets the URLs (paths) which will be protected by password
# authorization, and the username and password for each path. The
# username and password can be different for each path. The path
# given will match any URL beginning with that string, as with the
# auth-ip module.
#
# Examples:
# Protect /debug "debug:debug"
# Protect /~ "nickuser:nickpass"
#
# Note: This directive is listed as "optional" only because the
# module will still load even if no directives are listed;
# however, unless Protect directives are given, the module
# will not have any effect. Use a path of "/" to apply
# password protection to the entire server.
EndModule
################################ Database access module
Module httpd/dbaccess
# NOTICE: This module allows complete access to all Services data;
# be certain to protect it from unauthorized access using
# authorization modules or other means.
# Prefix <path> [REQUIRED]
# Sets the URL (path) at which database access will be accessible.
# If this does not end with a slash, one will be appended
# automatically. Access is provided using the following directory
# tree:
#
# <path>/ Main menu
# <path>/operserv/ OperServ data and menu
# <path>/operserv/akill/ Autokill list
# <path>/operserv/news/ News item list
# <path>/operserv/sessions/ Session and exception lists
# <path>/operserv/sline/ S-line lists
# <path>/nickserv/ Nickname list and information
# <path>/chanserv/ Channel list and information
# <path>/statserv/ Network statistics
# <path>/xml-export/ XML-format database download
#
# Categories for which the relevant module is not loaded will not
# be accessible.
#
# WARNING: These functions, particularly the XML export function,
# can cause Services to stop for a significant period of
# time while they are processed!
#
# This is commented out by default; make sure you implement proper
# access protection (see above) before uncommenting it.
#Prefix "/dbaccess"
EndModule
################################ Debug page module
Module httpd/debug
# DebugURL <path> [REQUIRED]
# Sets the URL (path) at which the debug page will be accessible.
# This must begin with a slash.
DebugURL "/debug"
EndModule
################################ Nick/channel redirect module
Module httpd/redirect
# NicknamePrefix <path> [OPTIONAL]
# Sets the URL (path) at which nickname redirects will be
# accessible; all characters after this prefix, up to the next
# slash, will be taken as the nickname. This must begin with a
# slash. The default value, "/~", emulates the traditional home
# page URL of "
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.If you use a
# directory name instead, it must end with a slash, for example:
# "/nickname/". See also ChannelPrefix, below.
#
# If not set, nickname redirects will not be done.
NicknamePrefix "/~"
# ChannelPrefix <path> [OPTIONAL]
# Sets the URL (path) at which channel redirects will be
# accessible; all characters after this prefix, up to the next
# slash, will be taken as the channel name (without the leading
# "#", which cannot be used in URLs). The path must begin with
# a slash. The default value, "/channel/", gives URLs like
# "http://services.example.net/channels/channelname/" for channel
# "#channelname".
#
# If not set, channel redirects will not be done.
#
# Note: If a URL could be interpreted as both a nickname URL and a
# channel URL, the nickname will take precedence, even if it
# is not registered or does not have a URL associated with it.
ChannelPrefix "/channel/"
EndModule
################################ Top page module
Module httpd/top-page
# Filename <path> [<content-type>] [OPTIONAL]
# Sets the name of a file to be delivered as the server's top page.
# If this does not begin with a slash, then it is taken as relative
# to the Services data directory. The second parameter specifies
# the MIME content type of the file; if not given, it defaults to
# text/html.
#Filename "Top Page.txt" text/plain
#Filename /var/
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.Redirect <URL> [OPTIONAL]
# Sets a URL to be provided as a redirect to a client accessing the
# top page. This must be a full URL, beginning with "http://" (or
# some other protocol specifier). If both Filename and Redirect
# are given, Redirect takes precedence.
#Redirect
Bu forumdaki linkleri ve resimleri görebilmek için en az 25 mesajınız olması gerekir.EndModule
###########################################################################
#
# Miscellaneous modules
#
###########################################################################
################################ DevNull settings
Module misc/devnull
# DevNullName <nick> <string> [REQUIRED]
# Specifies the nickname (first parameter) and "real" name (second
# parameter) used by the DevNull pseudoclient.
DevNullName "DevNull" "/dev/null -- message sink"
EndModule
################################ HelpServ settings
Module misc/helpserv
# HelpServName <nick> <string> [REQUIRED]
# Specifies the nickname (first parameter) and "real" name (second
# parameter) used by the HelpServ pseudoclient.
HelpServName "HelpServ" "Help Server"
# HelpDir <dirname> [REQUIRED]
# Specifies the name of the subdirectory containing help files for
# HelpServ.
HelpDir helpfiles
EndModule
################################ XML export settings
Module misc/xml-export
# This module has no configurable settings.
EndModule
################################ XML import settings
Module misc/xml-import
# OnNicknameCollision <action> [OPTIONAL]
# Specifies the action to be taken when a nickname in the data to
# import is already registered. The string must be one of either
# "skipgroup" (skip over the nickname group containing the nickname
# in the imported data), "skipnick" (skip only the colliding
# nickname), "overwrite" (drop the existing nickname), or "abort"
# (do not import any data). Note that when "abort" is selected,
# the entire XML input is still checked for errors, but Services
# will abort before actually merging any data.
#
# When using "overwrite", if a nickname group has only one nickname
# and that nickname is overwritten, the nickname group will be
# dropped as well. As a consequence, any channels owned by such a
# nickname will be dropped (or shifted to their successors) as
# well. All nicknames and channels overwritten or droppde in this
# manner will be displayed on standard error.
#
# If not specified, defaults to "skipgroup".
#OnNicknameCollision skipgroup
# OnChannelCollision <action> [OPTIONAL]
# Specifies the action to be taken when a channel in the data to
# import is already registered. The string must be one of either
# "skip" (skip over the channel in the imported data), "overwrite"
# (drop the existing channel), or "abort" (do not import any data).
# Note that when "abort" is selected, the entire XML input is still
# checked for errors, but Services will abort before actually
# merging any data. If not specified, defaults to "skip".
#OnChannelCollision skip
# VerboseImport [OPTIONAL]
# Causes a detailed list of imported nicknames, channels, and other
# data to be printed to standard output.
VerboseImport
EndModule